To understand which is best, it’s important to understand what rekeying actually entails. Rekeying should only be done on locks that are in good working order already. Basically, the inside working mechanisms will be changed out to be new and require a new key, leaving the outside hardware in tact. This often means a huge cost savings as opposed to changing and replacing the entire locking system. Though, sometimes replacing the lock is the only or best option.

When you re-key a lock, the locksmith will remove the pins inside the lock and replace them with new pins that can be opened using a brand new key. This is a good option when you are sure that someone stole your keys or know that someone has access to your house at any time uninvited. The safe option is to re-key the lock when you are sure someone else has possession to your keys that unlock your door, and you do not trust this person.

The locksmith removes the pins and springs in the lock cylinder and replaces them with new pins and springs that work with a new and different key. Unless a lock is not functioning properly or a completely new style of lock is wanted by the home owner, several locks are able to be rekeyed and kept in working condition for a long time. Some even claim their rekeyed lock operates even better than ever.

To get technical, the locksmith will remove the pins and springs inside the lock cylinder and replace them with new ones leaving the outside hardware, door knobs and such, in tact. A qualified, experienced locksmith will be able to quickly determine whether or not a rekeying or a lock replacement is your best choice.

Control The Spares

The most common reason to re-key a lock is to regain control of the spares. Simply put, gaining control of the spares merely means accounting for all of the keys that have been duplicated and made to operate the locks. Once you give a key to a friend or family member, the key control is lost. Rekeying also gives you brand new spare keys that you can control as to who has access to your locks. You not only have the peace of mind knowing no one else has a duplicate key, but you now have fresh spare keys that you can tuck away in a secure place only you know about or give to someone you know you can trust so that you can easily and quickly access it if you ever lose your keys again.

Sometimes, in an apartment complex or condominium, keys are created on a master key system. This means, the landlord has ultimate control over who has what keys. But, even in these scenarios, a key could get in the wrong hands. Plus, you always know that the landlord has a key to enter your premises at any time. Though, whenever you change locks out or re-key them in a leased property, you will probably need to obtain landlord consent first.

However, the master key concept is still at play in many single-build communities. The locks are often construction master keyed. This means that while the use of your key may prevent the future use of a contractor’s key, there are often master pins left in the lock. Each master pin is going to double the number of keys that will operate the lock. Often, there are as many as 16 different keys that could open a single home’s locks. Rekeying eliminates the potential of another key opening the lock since rekeying removes these master pins.

Problem With The Locks

Before you lose your keys, you may not have noticed any issues with the locks they once opened. During the rekeying process, the experienced locksmith will identify any other problems that the lock may have and will often be able to fix these issues. This is all done as part of the rekeying process and is nothing you probably would have ever noticed. When the rekeying is done, your lock will be left in a much safer and efficient functioning condition.

When Should You Replace and Change The Locks Entirely

Rekeying is not always the best solution. Sometimes, under certain scenarios, it is better to just go ahead and change out the entire locking system by replacing the lock instead of the more budget-friendly alternative of rekeying. One case that would warrant a lock replacement is when the lock hardware is worn out or beginning to show a great deal of wear and tear and cannot be repaired. In this case, you will need to find a trustworthy locksmith to install a new lock for you.

Another reason you might choose to replace your lock instead of merely rekeying it is when you need to upgrade your security. Do this by upgrading the lock. You might even decide you want an electronic lock. Either situation will mean that the existing locks will need to be completely changed out and replaced rather than rekeying them.

Some lock manufactures offer a lock that the consumer can re-key themselves. These locks are not the standard pin tumbler locks. To allow rekeying of these locks without fully disassembling them entails working with a lot of extra intricate parts that are easier to bypass than traditional locks and can lead to malfunction.

When you need your locks rekeyed or changed out and replaced, be sure to consult a reliable locksmith nearby who will know the best option for you to pursue and will be able to give you a price quote for the hardware and labor. While rekeying is usually the most cost-effective option in terms of saving money, you may have no other choice but to improve your security measures by replacing the entire lock. While the latter choice may be pricey upfront, it will be well worth it in the end.

The post Is It Better To Replace A Lock or Re-Key? appeared first on Colorado Springs Locksmith.

• stranded alongside your vehicle because you’ve lost your keys, locked them inside, or broken off a key in the ignition or car door;
• you are trying to gain access to your place of work;
• or you are standing outside of your house without a key,

a lockout never seems to happen at a convenient or appropriate time. Maybe it’s not one of the most common scenarios of a lockout that you have found yourself in. Maybe you are locked out of your storage unit or have forgotten the combination to your safe.

Automotive Lockout Scenario

You can’t find your keys, or you locked your keys inside the car. Worse yet, your key broke off inside the door lock or ignition, or your keys are locked inside the car with the engine running. Maybe you even shut the door leaving behind a small child or pet. These are all emergency lockout situations. In a panic, you will probably begin to try to attempt to enter the vehicle on your own. Not only does this more often than not do nothing more than waste time, you also take the risk of damaging your vehicle with repairs needed that your insurance will not cover, adding to your expense while minutes tick away. A better option is to first call a qualified locksmith who will show up in no time and get you back inside your vehicle, retract your key if necessary, and make you a duplicate key on the spot without leaving any damage to your car.

Residential Home Lockout Scenario

Your house keys are lost, or your door shut behind you leaving your keys locked inside. Regardless of the reason, you are now stranded outside your front door at your own home. Don’t worry! This is a very common situation that locksmiths handle on a daily basis. They understand your urgency to get back inside, to find your lost key, install a new lock, or re-key an existing one to ensure you are the only one who has access to the key that opens your home. Before you panic and attempt to break into your own house or pick a lock, calm down long enough to think straight and contact a nearby locksmith who will come to you and remedy your situation in a hurry.

Commercial Property Business or Office Lockout Scenario

You have lost your master key or electronic access card that allows you entry to work. Perhaps, the lock is worn and isn’t working properly, leaving you locked out. It doesn’t matter what the reason, the fact is that now you are trying to get inside your place of employment to work and are locked out. If your office has an on-call commercial locksmith, this is the one to call. If not, you will need the fast and reliable services of a commercial locksmith who will quickly get you inside. When the locksmith arrives, you will need to show proof of identification.

Preventing a Lockout from Happening

Of course, the best method of handling a lockout is preventing it from occurring in the first place or being prepared just in case. Some steps to take include:

• Leave a spare key with a trusted neighbor, friend, or relative
• Hide a spare key in a location that is out of the sight of passersby and not in a typical “under-the-door-mat” obvious location.
• Keep a spare key in your wallet
• Avoid damaged, worn locks by keeping them properly maintained

While your first reaction will probably be panic and frustration, the best thing to do when you find yourself in the middle of a lockout is to call for help from a trustworthy mobile locksmith, skilled and ready to show up at your location in no time at all.

The post Lockout appeared first on Colorado Springs Locksmith.

What Is A Mobile Locksmith?

Let’s face it! When you need a locksmith in a hurry, it’s probably not at a convenient time or even a convenient location. You need help, and you need help fast! Mobile locksmiths are just as the name implies. They are locksmiths who are mobile as opposed to one who is on location, on staff, or requires appointments at their location to help. A mobile locksmith is a trained and ready professional locksmith who is equipped and ready to come to your location when you have a lock or key need and cannot spend time making an appointment to meet with a locksmith at the locksmith’s office.

Another benefit to a mobile locksmith in Colorado Springs is that they know the area, so they will easily be able to find your location when you call. We are local and will never send technicians out from a national call center who may or may not understand the locale.

Mobile locksmiths are nearby and ready to come to you when you need them, so you know that help will arrive in 30 minutes or less, anytime day or not and even on holidays.

When you are locked out of your car or home, broken a key off in the ignition, lost your keys, need a re-keying service, or are stranded roadside, or need transponder keys programmed or car keys made on the spot, we come to you in and around the Colorado Springs area. We take the panic out of emergencies. Lock and key emergencies require the services of someone who can work on the lock, which means that even if it’s not an emergency situation, it would be very awkward and inconvenient to dismantle a door with a lock intact or get the vehicle to another location for service. That’s why mobile locksmiths come to you to provide the service you need right there on the spot.

Our Mobile locksmith in Colorado Springs is available 24 hours to come to you when you need a professional service. We provide:

• Affordable unlocking services
• Fast keys made on the spot
• Quick lock changes
• Fast locks re-key services
• And more

Our professional locksmiths are on call anytime you need us, 24/7. Our staff of trusted locksmiths are dependable and affordable. We strive to build our business on trust and excellence. We provide our customers with fast, friendly service and trustworthy pricing upfront with no hidden costs.

Colorado Springs Locksmith send our mobile locksmiths to you fully stocked with the tools and fully trained with the know-how they need to get your job done fast and right the first time.

It’s time to call the best mobile locksmith in Colorado Springs. Call and discuss your locksmith needs now before you are in an emergency situation. Then, when you do find yourself in need of a mobile locksmith in Colorado Springs, you will know who to call.

The post Mobile Locksmith appeared first on Colorado Springs Locksmith.

They are used, sometimes in the hands of the wrong people, to pick a lock and gain entry. It is estimated that more than 95% of conventional home and business locks are vulnerable to being picked using a bump key.

Bump Key Can Damage Locks

Depending on the lock, how often a bump key has been used on the lock, and the amount of force applied, bump keys have been known to leave permanent damage to the lock.

Pin Tumbler Locks

Bump keys work with pin tumbler locks, so to understand exactly how a bump key works, you must first understand how a pin tumbler lock functions. Pin tumbler locks are made up of:

• key pins
• Driver pins
• Located within the core and cylinder

The key pins and the driver pins are inside the same pin hole. They are pushed together by a spring to prevent the core from rotating.

Shear Lines

When you align the key pins and the driver pins to allow a separation between the two pins to align with the separation between the core and the housing, you create a shear line. The shear line allows the core, or plug, to rotate inside the cylinder.

When the properly cut key is inserted into the keyway, the key aligns the gaps between the pins with the edge of the lock core and pushes the pins into alignment along the shear line. This allows the core to be rotated and the bolt work to be retracted and unlocked. If you insert a key that has not been cut for that specific lock, the gap between the pins will not line up with the gap around the core, so the core will not rotate because the shear line has not been formed.

How Bump Keys Are Used

A bump key can be made using a key that already fits a specific lock, or some are even crafted by burglars in their home. Once made, the bump key is partially inserted into the lock so that one pin, or notch, stays between allowing full insertion of the key. With very little movement of the bump key, it is eventually fully inserted, relying on the spring tension of the pins to align the bump key. The person using the bump key then applies an impact force, referred to as a bump, to force the key deep into the lock. When this force is applied, the key pins jar, and the driver pins jump for a split second, aligning and creating a shear line. Once the shear line is established, the lock can be opened.

Is Lock Bumping the Same as Picking a Lock?

Lock picking requires patient skill that usually leave little or no damage to the lock. Bumping a lock, however, relies heavily on the actual bumping technique, that ultimately forces the lock open and can damage the lock in the process. Most professional locksmiths are equipped with the proper tools needed for opening a lock without leaving any damage to the locking mechanisms or the outer assembly of the lock.

The post Bump Key appeared first on Colorado Springs Locksmith.

No Car Key Means You Are Stuck

If you lose that set of car key, your key breaks off into the door lock or ignition, you damage your key, the batteries die on that fancy electronic key fob, or for whatever reason, those keys cease to work properly, your first matter of business will be to acquire a working set of car key to send you on the road again.

Never A Convenient Time

When you discover you need new car key, it is never a convenient time that is planned. You may even be in an emergency situation that requires fast action. It is important to know what kind of key your car requires.

There are several different types of car key that skilled locksmiths understand well and are capable of duplicating, cutting a new set or reprogramming quickly.

Traditional Car Key

For years upon years, a traditional car key was the only kind of key used to operate a vehicle and open or lock its doors and trunk. Often, one key was required for the doors or trunk, while a separate key was used for the ignition. What used to be the norm is now a bit out of date and even old fashioned, though still used on many automobiles. These keys were used until late into the 20^th century when laser key cutting was introduced. The traditional car key use a traditional key cutting machine for duplication of this style of key.

Laser Cut Car Key

When laser cutting was introduced, it was intended to provide an extra measure of security in duplicating car key. A laser cut key is sometimes called a sidewinder key or an internal cut. The way this style of key offers additional security is that they have lock cylinders that are more difficult to pick than the traditional metal cut keys. This extra security step also makes it more difficult to duplicate and copy the key because of the process of the designed using complex technology and specialized software on the laser-cutting machines.

Vehicle Anti-Theft System VATS Keys

In an effort to make it virtually impossible to steal your car, a system to deter car thefts was created. VATS, which stands for Vehicle Anti-Theft System, car key are cut mechanically and then a black resistor is added to the blade of the key. This resistor is often confused with and thought to be a computer microchip, but it is not. There is no computer electronic technology involved. The resistor is there for the purpose of providing one of 15 potential values. These keys are designed to give you added security.

Technology Changed The Key Duplication Process

With technology advancing toward smart phones and electronics, car keys are no exception. Newer model cars offer a variety of electronic keys ranging from Smart Car Keys, Electronic Key Fobs and Transponder Keys.

Electronic Key Fobs

Electronic key fobs have become common place within the last decade. They are used to make unlocking a car door convenient and essentially keyless. With the touch of a button and a click or two, you are able to unlock doors, open trunks or back hatches, lock doors, and turn on or off an alarm system.

Electronic Key Reprogramming

Some car manuals suggest you get your electronic key fobs programmed or replaced by your car dealership. What they don’t explain is that a qualified locksmith is able to provide you with this service at a fraction of a cost and usually in a more timely manner.

Smart Keys

Smart keys offer a complete keyless entry and ignition starting feature by implementing microchip sensor technology that only requires you to have the keys located on or near you within a specific proximity to the car.

Transponder Keys

A transponder key takes the process of creating a car key to an entirely new level of security and technology. These car key have a metal-notched key that extends from an enclosed computer microchip built in that is designed to prevent car thefts as they add ignition security. Transponder keys are sometimes cut mechanically. Other times, a laser cut is used for car key duplication of transponder keys.

Using A Locksmith to Get A New Set of Car Key Replacement 

Asking a Locksmith to duplicate your car key is sometimes the most cost effective, timely and convenient way to go! especially if you have a transponder key that needs to be reprogrammed before it can sync with your vehicle to operate properly. A locksmith will usually charge significantly less money to duplicate or reprogram your car key than would a car dealership. In addition to the potential cost savings of the actual key duplication or programming, you will also save a great deal of money that you would otherwise spend on having your car towed to the dealership to receive the same services at a heftier fee. Save time and money by  checking a locksmith near you phone number before you lose your car key. Make sure you find a 24 hour locksmith service just in case. 

The post Car Key Replacement appeared first on Colorado Springs Locksmith.

Apartment complexes, condominiums, or some residential neighborhoods with home associations keeping the community feel intact sometimes have community mailboxes, also called cluster boxes. These mailboxes are located in one central location, either at the driveway entrance to the neighborhood or complex, or inside the front lobby of the housing office. These community mailboxes make it very convenient for the mail carrier to efficiently deliver mail for the entire complex or neighborhood while still designating your personal mail into your assigned community cluster mailbox.

Individual Yet Attached Mailboxes

You receive your mail in your box, but your box is located or attached to a group of other mailboxes held by your neighbors. Because your mailbox is one individual box among several, each box has its own lock and key so that each owner of the mailbox may have access to their own individual mailbox for retrieving personal mail.

Changing the Mailbox Lock On Your Cluster Box or Community Mailbox Unit

Community mailbox or cluster box systems usually come equipped with the same or similar style of locks. They have a fairly basic cut key style with a rounded lock component held into place with a clamp bar on the inside door of the mail box. These mailbox lock are not difficult to replace if you understand locking systems and have the skill, parts, and tools to get the job done. For a trained locksmith, a mailbox lock change can be performed in no time at all and for a reasonable cost.

Why Change the Locks on Your Mailbox?

With this logical and very efficient system in place for delivering and retrieving mail, why would you ever need to change any part of it?

Top Reasons For A Mailbox Lock Change

There are a few reasons why you may find yourself wanting or needing to get a mailbox locks change.

Not The Only Owner of The Mailbox

If you had your house built within a neighborhood that uses community mailboxes, then you are the first and only person to ever have access to your assigned mailbox. However, living in a mobile culture means that people move frequently. Chances are your mailbox had a previous owner. This means it is possible that there is a duplicate key floating around in the hands of someone you don’t know. Since you don’t know them, you don’t know whether or not they are trustworthy.

A roommate breakup or divorce

One of the most unsettling feelings that shake your sense of peace and security is when you are going through a divorce or breakup of a relationship. If that relationship involves a person who has access to your mailbox keys, your security is at risk. When you do not trust the person who has a copy of your keys, the best thing to do is to change out the entire locking system to ensure you are the only one who has access to your privately assigned mailbox.

Lost Your Keys and Need To Get Your Mail

Loosing keys happens all of the time, but thankfully it doesn’t happen to you every day. When you lose your keys, you cannot be certain that they are not in the hands of a stranger who may want to cause harm or do damage to your possessions inside your mailbox. It is a very sound reason for getting a mailbox lock change to start fresh knowing you are the only one who has access to hour mailbox and its contents.

Malfunctioning or Broken Mailbox Lock or Key

Cluster boxes that are designed for a community mailbox system are often located outside. These boxes sit all day in the weather elements, and it’s not just rain that causes damage. Sunshine, excessive heat, cold, and snow cause damage as well. Ice often gets inside the locking components and freezes them which weathers them even more. Locks start to rust and show wear. Dust gets inside, and locking mechanisms gum up and stop working properly. When the lock malfunctions or breaks, it’s time to get the mailbox lock changed to make sure they work properly when you need to gain access to your mail.

Is It A Federal Offense To Change A Mailbox Lock?

What Is Involved In A Mailbox Locks Change – How Difficult Is The Job and Who Can Perform It?

While a mailbox lock is made up of fairly simple, basic lock and key parts, a mailbox is not just locked box. It is the property of the United States Postal Service and is protected under Federal Law making it a federal violation to tamper with its contents. Because the mailbox has been assigned to you for use, you are an authorized user. You can request that the locks on your own mailbox be changed by a qualified professional locksmith provided you show proof of identification.

Show Proof Of Ownership And Proper Identification.

The reason for this is so the locksmith can provide you with a mailbox lock change only after proving you are the proper person who has access to that particular mailbox. When the locksmith arrives to perform your mailbox lock change, he will ask to see proof of residence and a form of ID that shows you have authority to access to mailbox. Once the locksmith verifies that you are who you say you are, the professional locksmith will start to work to provide you with a mailbox lock change.

Locksmith Colorado Springs 

The post Mailbox Lock Change appeared first on Colorado Springs Locksmith.

Could your day get much worse? There you are standing in frustration that you are in a car lockout Colorado Springs situation. Maybe you have lost your keys, or locked them inside the car. Worse yet, maybe you locked the keys inside your car with the engine running, or the key broke off in the ignition or door. Now what? These are a few different reasons that could have landed you in this predicament and tips on getting the right kind of help.

Lost Your Keys

Whatever courses of events or distractions led up to it, you are now standing outside of your vehicle with hands rummaging through your pockets, purse or brief case, frantically moving everything in your path trying to find your keys. Your mind rapidly tries to retrace your steps, but the keys are just not turning up. You’re locked out of your car. Don’t waste any time and called Colorado Springs Locksmith For New Car Keys!

Locking Your Keys Inside Your Car

Before you think this could never happen to you, think again. It happens to even the most organized and intelligent people. All it takes is one distraction or one step that’s out of routine. You hear that door latch behind you and realize your keys are still inside the vehicle, and you are now outside feeling shocked, worried, and a bit panicky. Or, maybe you don’t realize it right away. The end result is the same. You are now in need of immediate assistance to get inside and successfully be reunited with your keys. Call Colorado Springs Locksmith for fast 24 hour car lockout Colorado Springs service at (719) 694-5225.

Locking Your Keys Inside Your Care With The Engine Still Running

If you thought locking your keys inside your car was bad enough, it could be worse. You could have just shut that door with the keys locked inside while the engine is running. Now, you have two problems: First, you need to get inside your vehicle and grab those keys. Second, you are burning gas with every passing minute it takes to get back inside. Don’t Waste any time call our car lockout Colorado Springs mobile service now!

The Key Broke Off In The Lock

Whether it happened because the key was showing signs of wear that you didn’t notice or because you started that engine or tried to open the door with a little bit too much gusto, you now have a big problem. Your key broke off in the lock. Perhaps, it could be worse. It could have broken off while the engine was running. Maybe it did. Regardless, you need to extract that broken key and have a new car key made so you can unlock the door or start your engine again.

Now What?

Your first thoughts are probably coming from a bit of a panic, so it’s important to calm down and breathe. There are some Do-It-Yourself DIY hacks that occasionally work, but before you waste time and cause potential damage to your vehicle which, by the way, won’t be covered by your insurance company; it is probably time to call our Colorado Springs locksmith who will show up in a hurry with the proper tools and know-how to get you back in the driver’s seat and get your day back on the right track.

It Happens To Everyday

Even though, it doesn’t happen to you every day, and it’s unpleasant or perhaps a bit embarrassing; a car lockout Colorado Springs is very common. Area locksmiths know what to do to help. The key to getting assistance fast and reliably is to calm down and take the steps to get back inside the vehicle with a working key. First, try to remember by running down a list in your head of all of the possible places you may have a spare key and whether or not there is a safe way to gain access to the inside of your vehicle. After you’ve tried these steps, or if your car lockout Colorado Springs situation includes a running engine, it’s time to get a locksmith on the scene.

Things To Know Before You Hire a Locksmith for a Car Lockout Colorado Springs

Newer Automobile Models Are Loaded With High Security Standards

If your car was manufactured within the last 10 years, chances are that higher levels of security came built in with it. This means that you can toss out the window solutions that used to work, like the idea of using a coat hanger to lift up a lock button through the thin opening where the window and rubber seal meet. Newer model vehicles call for the right tools that won’t cause damage to your car. Professional mobile locksmiths have specialty tools on hand and show up at your location in no time. 

Choose A Colorado Springs Locksmith You Can Trust 

Choose a Colorado Springs locksmith who will come to your location quickly. The term locksmiths typically use for this kind of service is called a mobile Colorado Springs locksmith. When you’re locked out of your car, you probably have no time to waste. Expert locksmiths who handle car lockout Colorado Springs situations know far too well that not only is your time valuable! but your safety may be at stake as well. Call a locksmith who will guarantee to show up in less than 30 minutes.

Ask information about our Colorado Springs locksmith company’s licensing, insurance, and bonding standards. Even though each state varies as to the requirements of locksmiths, many still stay up-to-date with training on the latest technology, tools, and techniques. If your car has been manufactured in the past few years, you’re going to need a locksmith who not only understands traditional keys and locks but also knows how to help with electronic key fobs or transponder keys on the spot.

Plan Ahead 

Car lockouts are never planned, and they tend to happen at the worst possible times. Hoping or thinking it will never happen to you, is not a fail-proof plan. Make a plan now, before it happens! to store a spare key in a location or with someone you trust who will make it available when you need it, and have a locksmith’s phone number ready to access for help. Once you find a reliable locksmith, add the phone number of the trusted Colorado Springs locksmith company name to your contacts on your phone or in a spot that you can quickly get to. Make sure that spot is not inside your locked car which you now have no key to access. Plan ahead now to be prepared when you need a Colorado Springs locksmith to help you in a car lockout Colorado Springs situation.

Call Colorado Springs Locksmith Now! We are available 24 hours and ready to help you with any of your car lockout Colorado Springs needs! Call us now for FAST mobile locksmith and low rates!

24 Hour Car Lockout Colorado Springs Mobile Service

Call Now (719) 694-5225

The post Car Lockout appeared first on Colorado Springs Locksmith.

Professional Home Locksmith Colorado Springs (719) 694-5225

It’s your house, and you are the one who will be living with the locks, so be sure you select the right locks for your residential needs. Our technicians are on call to arrive in a timely manner. All our technicians are knowledgeable to answer any questions you might have about locks and key issues. As soon as you call, we will show up within a half hour ready to help.

A home locksmith will Colorado Springs also be able to walk around your home’s premises and point out trouble spots for potential break-ins to head off any trouble before it even happens. This professional will be able to provide you with quality locks on doors, windows, patio doors, garage doors and recommend the best deadbolts or key-less entry systems.

Some of the services a home locksmith Colorado Springs provides include a long list of services to cover every residential security and locks needs:

• Emergency lockouts when you find you’ve lost your keys or for some other reason are unable to turn the lock to get inside, a home locksmith shows up on a call’s notice to get you through the doors of your home.
• Garage doors locks – Sure the house is secure, but sometimes the most obvious point of entry is overlooked, the garage. Many burglars actually enter through an open garage where they are able to hide. Make sure your garage doors are closed and locked.
• Patio doors locks – Sliding patio doors are among some of the easiest to break into. A home locksmith will make sure your sliding doors are secure.
• Mailbox locks – Some neighborhoods and many condominium or apartment buildings have central mailboxes. Each individual mailbox has its own lock. When you move into a new place or your mailbox locks become weathered. A home locksmith will be able to help install or re-key. mailbox locks.
• Window locks – One of the fastest and easiest ways a burglar enters a home is through an unlocked window. Be sure to fasten and secure windows with window locks.
• Deadbolts – These bolts provide an extra protection when locking as they more difficult to kick in or pick.
• Key less entry – More and more home owners are going key-less with digital locks. The benefits are endless, with one plus being that changing a key is as simple as changing a code.
• Lock re-keying – Instead a complete locks change, often a locks re-keying is  more affordable.

Call our home locksmith Colorado Springs today for reliable and experienced help (719) 694-5225

The post Home Locksmith Colorado Springs appeared first on Colorado Springs Locksmith.

Start Fresh and New With a Clean Slate

Maybe you just moved to a new home. Maybe you have left an unsettling life situation and want a fresh start. Maybe there was an attempted break-in on your home or business or nearby. Maybe your locks are worn out or damaged. Or, maybe you’ve lost your keys? and want to provide a roommate, family members, or workers with a new set of keys. Learn the top reasons to make a locks change.

Had A Break-in? Call Colorado Springs Locksmith (719) 694-5225

Recent Move to a New Location

One of the most common reasons for a locks change is after you move into a new home or office. Even if you knew the previous owners or tenants, chances are you probably are not 100% certain as to who has access to those locks. On move-in day when you’ve unloaded that last box or piece of furniture off of the moving truck, take the extra step to make sure everything is safe and secure by setting up an appointment with a locksmith to change the locks, get you a brand new set of keys and an entirely new locking system.

Lost keys or Extra Keys 

While sometimes a lost key or a need for an extra set of keys requires nothing more than having one cut, there are times when it’s best to do a full-out locks change. Hand a new employee or roommate a set of keys knowing that they are the only other people who have access to your locks. Unless you are absolutely certain as to the whereabouts of your keys, the safest step is to get brand new locks.

Increase Security After Attempted Break-ins

If there has been an attempted break-in to your home or office, it’s best to do a locks change. Even if the attempt was unsuccessful, often times burglars try to pick or kick in a lock and then return later after they have weakened the structure of the door frame or locking system. The second time, they are quite often successful at the break-in attempt. Head them off at the pass by doing a locks change immediately after an attempted break-in.

Damaged Locks

Locks wear out over time. Even the top-notch quality brands begin to rust or show signs of use. When this happens, they become easier to kick in, to be picked, or to otherwise fail to keep you secure. Have your locks examined periodically, and when they become over worn, have them changed.

When you need your locks changed completely, make sure you work with a reliable professional locksmith who has experience. Each new lock is as unique as you are. Some top-name locks include Kwikset, Schlage, Weiser, Master, Medeco, Assa, or Mutilock. Select an expert who will be able to recommend the best type of lock for your home, car, or office. Pick a lock that looks great with your individual architecture and door styles and fits within your budget.

Unlock the expertise of an experienced locksmith ready to come to your location to change your locks and give you a fresh, secure start.

The post Top Reasons For Locks Change appeared first on Colorado Springs Locksmith.

Any commercial building would need many different quality door locks. Great caution should be made to install the finest locks for office doors, fire doors, entryways, restrooms, utility cabinets and every place within the building where privacy and accessibility need to be controlled. You should take time to discuss with the contractor on the different types of commercial locks available to fulfill all the security requirements.

The outdoor entrances of the building can be fixed with a variety of deadbolt or different type of commercial locks. The type of security needed will determine whether you should use heavy duty or standard commercial locks construction. A standard commercial deadbolt works nicely for office buildings. However, heavy duty commercial deadbolts will provide you with the utmost security. You should look for a reliable Colorado Springs locksmith that understands commercial locks very well. He should be able to use a lock construction that includes a concealed wood frame reinforce to prevent kick-in.

Commercial Locksmith Colorado Springs (719) 694-5225

You will likely need to match a cylindrical lock with a deadbolt allowing for easy entrance. Your options include knob locks and lever design locks. A heavy duty lever lock works for factories, hospitals as well as schools. Commercial buildings with lesser strict security needs can go for medium duty or standard lever commercial locks. Some lever locks can also be used on 3-hour fire doors. In addition, door knob locks are obtainable in heavy duty and medium designs. You can use the knob locks for the interior doors of your commercial building.

One of the best choices for exterior doors of hotels, offices and light-duty commercial buildings are interconnected locks. These locks are referred to as interconnected because the disabled compliant handles unlatch both the deadbolt and the handset when it is depressed. A good interconnected lock will come with a reinforced deadbolt strike in order to not to allow any intruder to kick the door open from outside.

Regardless of the type of commercial locks needed in a building, most lock manufacturers offer various finishes that can be fitted across all styles. This will allow for a consistent aesthetic appeal all over the building.

When you need your commercial locks changed for your store or business, call Colorado Springs Locksmith! We are fast and affordable 24 hour mobile locksmith and ready to serve you 24 hours a day! Call  Us Now! For professional locksmith service and low rates!

Colorado Springs Locksmith – Call Now! (719) 694-5225

The post Commercial Locks appeared first on Colorado Springs Locksmith.